English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese
Din 2738 Plastic Mould Steel
109 आईएनआर
उत्पाद विवरण:
X
Din 2738 प्लास्टिक मोल्ड स्टील मूल्य और मात्रा
- 200
- किलोग्राम/किलोग्राम
Din 2738 प्लास्टिक मोल्ड स्टील व्यापार सूचना
- मुंबई नवशिवा
- 100 प्रति दिन
- 1 हफ़्ता
- Yes
- हमारी नमूना नीति के बारे में जानकारी के लिए हमसे संपर्क करें
- ऑस्ट्रेलिया उत्तरी अमेरिका पूर्वी यूरोप मिडल ईस्ट पश्चिमी यूरोप अफ्रीका मध्य अमेरिका दक्षिण अमेरिका एशिया
- ऑल इंडिया
उत्पाद विवरण
Din 2738 Plastic Mould Steel Chemical Composition - (Typical Analysis in %)
| STANDARDS | P20+Ni | DIN 2738 | 40CrMnNiMo8-6-4 | AISI P20+Ni |
| C | Si | Mn | P | S | Cr | Ni | Mo |
| 0.35-0.45 | 0.20-0.40 | 1.30-1.60 | 0.030max | 0.030max | 1.80-2.10 | 1.90-1.20 | 0.15-0.35 |
Din 2738 Plastic Mould Steel has excellent hardening penetration and is specially used for Plastic injection die moulds. The characteristics of a material are right sharpening, photo-etching properties with high purity and good homogeneity. P20+Ni is upgraded version of plastic mold steel 0f 2311, which normally supply in Pre hardened condition. Hardness in as supplied condition 280-320 HB with having uniform hardness. It can be subject to a nitriding treatment to improve its wear resistance.
Steel Properties:
- P20+Ni is upgrade version of plastic mold steel 0f 2311, which normally supplied in Prehardened condition
- Hardness in supplied condition is 280-320 HB
- Additional nickel content of 1 % increases through hardening
- It is micro-alloyed
- Good machinability
- Suitable for texturing
- Outstanding Polishability
- Corrosion resistance
- Vacuum-degassed steel with the following excellent features.
Application: P20 is equivalent grade of most popular steel grade of DIN 2738 which is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Bolster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Upsetter Blocker, forging dies, Different dies & mold for plastic products etc.
Physical Properties:
| Coefficient of Thermal Expansion at °C | 10 ¯ m / (m*K) |
| 20-100 | 11.2 |
| 20-200 | 12.8 |
| 20-300 | 13.5 |
| 20-400 | 13.7 |
| 20-500 | 14.3 |
| 20-600 | 14.7 |
| 20-700 | 14.9 |
| Thermal Conductivity at °C | W / (m*K) |
| 20 | 35 |
| 350 | 34 |
| 700 | 33 |
Heat Treatment:
| Soft Annealing °C | 710-740 |
| Cooling | Furnace |
| Hardness HB | max. 235 |
| Hardening °C | 840-870 |
| Quenching | Polymer or Oil |
| Hardness after quenching HRC | 51 |
| Tempering °C after quenching | 100 | 200 | 300 | 400 | 500 | 600 | 700 |
| HRC | 51.5 | 50.2 | 48 | 46.2 | 43 | 39 | 29 |
क्रय आवश्यकता विवरण दर्ज करें
Plastic Mould Steel (IND/USA/EUR) अन्य उत्पाद
जांच भेजें
जांच भेजें
एसएमएस भेजें
मुझे निःशुल्क कॉल करें
 |
VENTURA ALLOY AND STEELS PRIVATE LIMITED
सर्वाधिकार सुरक्षित.(उपयोग की शर्तें) इन्फोकॉम नेटवर्क प्राइवेट लिमिटेड . द्वारा विकसित एवं प्रबंधित |