English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese
L6 Die Block Steel
135 आईएनआर/Kilograms
उत्पाद विवरण:
X
L6 डाई ब्लॉक स्टील मूल्य और मात्रा
- किलोग्राम/किलोग्राम
- 150
- किलोग्राम/किलोग्राम
L6 डाई ब्लॉक स्टील व्यापार सूचना
- 50-100 प्रति दिन
- 1 हफ़्ता
उत्पाद विवरण
Ventura Alloy and Steels Stocks and Supplies L6 Die Block Steel in India and abroad. It is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe - a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Chemical composition of L6 Die Block Steel - (Typical analysis in %)
| Standards | DB6 |
| DIN2714 |
| AISI L6 |
| AFNOR | 55NCDVV7 | JIS SKT4 |
| 55iNiCrMoV | C | Si | Mn | P | S | Cr | Ni | Mo | V |
|
| 0.50-0.60 | 0.10-0.40 | 0.65-0.95 | <0.015 | <0.004 | 1.00-1.20 | 1.50-1.80 | 0.45-0.55 | 0.07-0.12 |
| USA | Europe | Germany | China | Japan | India | R.of Korea | Russia |
| AISI/SAE | En | DIN,WNr | GB | JIS | IS | KS | GOST |
| A681 L6 | 55NiCrMoV7 | 56NiCrMoV7 | 5CrNiMo | SKT 4 | T55Ni7Cr4Mo5V1 | STF 4 | 4ChMNFS |
PROCESS ROUTE
EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS
STEEL PROPERTIES
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases.Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.
Application of L6 Die Block Steel
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds,Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, plastic moulds Etc.
PHYSICAL PROPERTIES
| Coefficient of Thermal Expansion at°C | 10 m/(m*K) |
| 20-100 | 12.1 |
| 20-200 | 13.1 |
| 20-300 | 13.2 |
| 20-400 | 13.5 |
| 20-500 | 14..1 |
| 20-600 | 14.3 |
| Thermal Conductivity at °C | W/(m/*K) |
| 20 | 35.0 |
| 350 | 39.0 |
| 700 | 36.0 |
HEAT TREATMENT
| Soft annealing °C | 650-710 |
| Cooling | Furnace |
| Hardness HB | max, 240 |
| Hardening °C | 840-880 /860-900 |
| Quenching | Oil / Air |
| Hardness after quenching HRC | 57 / 55 |
| Tempering °C after quenching | 100 | 200 | 300 | 400 | 450 | 500 | 550 | 600 | 600 |
| in Oil -HRC | 56 | 54 | 52 | 49 | 47 | 46 | 43 | 38 | 34 |
| in Oil -HRC | 54 | 52 | 50 | 47 | 45 | 43 | 40 | 36 | 32 |
Size Range:
- Rounds - 60 To 1000 Mm Dia.
- Blocks - Thickness - 125 To 1000 Mm Max | Width - 130 To 1600 Mm Max.
क्रय आवश्यकता विवरण दर्ज करें
Hot Work Steel (IND/USA/EUR) अन्य उत्पाद
जांच भेजें
जांच भेजें
एसएमएस भेजें
मुझे निःशुल्क कॉल करें
 |
VENTURA ALLOY AND STEELS PRIVATE LIMITED
सर्वाधिकार सुरक्षित.(उपयोग की शर्तें) इन्फोकॉम नेटवर्क प्राइवेट लिमिटेड . द्वारा विकसित एवं प्रबंधित |